Blog

ABS material has excellent comprehensive performance, hard, shiny and easy to color. It is widely used in various fields and can be called the "king of Almighty" in the plastic industry. 1、 Introduction to ABS materials ABS is a polymer composed of acrylonitrile a, butadiene B and styrene s. 1,3-butadiene can provide low temperature ductility and impact resistance for ABS; Acrylonitrile provides ABS with hardness, heat resistance, acid and alkali resistance and other chemical corrosion properties; Styrene can provide ABS with hardness, processing fluidity and product surface finish. In terms of morphology, ABS is an amorphous material, which has many…

Angle steel: weight per meter = 0.00785 * (side width + side width - side thickness) * side thickness Round steel: weight per meter = 0.00617 * diameter * diameter (rebar and round steel are the same) Flat steel: weight per meter = 0.00785 * thickness * side width Pipe: weight per meter = 0.02466 * wall thickness * (outer diameter - wall thickness) Plate: weight per meter = 7.85 * thickness * width Brass tube: weight per meter = 0.02670 * wall thickness * (outer diameter - wall thickness) Copper pipe: weight per meter = 0.02796 * wall thickness…

1. Allowable burr height of punching parts (1) limit value of burr of blanking parts It is not allowed that the burr of blanking parts exceeds a certain height. The limit value of burr height of stamping parts (mm) is shown in the table below.  (2) marking requirements for burrs in design drawings *Burr direction: burr side. *Parts requiring burring: coin or coin continue. Generally, do not press all the burrs on the fracture of the whole structural member, which will increase the cost. Try to use it in the following situations: the fracture exposed to the outside; Sharp edges…